SPECIFICATIONS

Model Number: DSE501K

is_customized: Yes

shipping: free

performance: good

stock: yes

Generator Controller DSE501K

Product Name: DSE501K
Product Description:
Generator Key Start Module: DSE501K

Control Modules are provided as follows:
1) Key Start Module: DSE501K, DSE701, DSE702;
2) Auto Start Module: DSE5110, DSE5210;
3) Auto/ AMF Start Module: DSE5120, DSE5220, DSE704

The  Model 501K-1 is a Manual Engine Control Module, which has been designed to manually control the  engine via a key switch on The front panel. The module is used to start and stop the engine, indicating fault conditions; automatically shutting down the engine and indicating the engine failure by LED giving true first up fault annunciation.

Operation of the module is via a three position key switch mounted on the front panel with STOP(O), RUN(I)  and START(II)  positions. In the ‘O' position the DC supply is removed from the module and the run relay and alarm output are de-energised. If the switch is turned to the ‘I' position the module is powered up and the run relay is energised, activating the engine fuel/ignition system and the protection hold-off  timer is initiated. If the switch is moved to the ‘II' position and held against the spring return, a positive supply is applied to the relevant output terminal and on to the starter motor. Once the engine has started the switch should be released and allowed to return to the ‘I' position.

Operation of any of the following alarms; Low Oil Pressure, High Engine Temperature, Auxiliary Shutdown,  Overspeed (Optional), will cause the run relay to de-energise.This will remove the fuel/ignition supply from he  engine and bring it to rest. The alarm output will be activated giving a positive DC output.

Each alarm channel has it's own LED indicator and once activated no further alarm conditions will be accepted.    The alarm output and relevant LED will remain active until the unit is reset by turning the switch to the ‘O' position.

Overspeed Protection (Optional) is achieved by  the fitment of an additional PCB in the module. This provides  integral overspeed protection derived from either the generator HZ output or the engine magnetic pick-up  (specified on ordering). The overspeed circuit continuously monitors the engine speed and will shut down the engine immediately if a pre-set speed level is exceeded.  This trip level is adjustable from 90% to 130% of full  rated speed and is suitable of both 50Hz or 60Hz systems.

During engine cranking and for a short time afterwards the protection hold-off timer is active and the relevant alarms inputs are inhibited. This enables the engine to start and achieve normal running conditions. Once  the  timer has expired the inputs are enabled providing normal protection from the module.

Charge Failure warning is also provided by monitoring the WL terminal on the charge alternator. This operates on a similar principal to the warning lamp fitted in a motor vehicle, should the output fail the charge fail LED will illuminate. The module  will also provide the alternator excitation current via this connection.

Payment

Credit card online is available.

ere is any import duties or taxes,it is the buyer's responsibility.

Shipping Detail

Item will be shipped 1-3 working days after payment.

Customer Service

Please contact us immediately if there is a problem with your item. We will get back to you.Thanks for cooperation and this is to make sure buyers get 100% correct parts.
We are always trying to offer best solution when problems come and hope that in case any problem happens, we communicate and solve it together.